• 2 year warranty and 60 years of Dynisco industry experience
• Accuracy better than ±0.5%
• TiAlN diaphragm coating is standard
• mV/V, 0-10VDC, or mA outputs available
• Integral temperature sensor option
• Available in configurations that fit most extruder applications
• 1.5M, 3M, 5M, 7.5M & 10M psi pressure range capability

• Integral relay switch for redundant safety and future compliance
• 3rd-party agency analysis (exida™) and self-certified based on FMEDA analysis and internal audit.
• Meets Performance Level ‘c’ as defined by the Machinery Directive (single sensor installed per Category 1).
• Meets Performance Level ‘d’ as defined by the Machinery Directive (two sensors installed per Category 3).
• Meets the following compliance directives, when properly installed and used:
  • Machinery Directive 2006/42/EC
  • NFPA 79 clauses A.9.2, A.9.4.1, A.9.4.3.2
  • EMC Directive 2004/108/EC
  • PED 97/23/EC
• Available on popular mV/V (PT, MDA, DYN) and mA-HART SPX models

• Adjustable zero and span, via side-mounted pots
• Accuracy better than ±1.0%
• DyMax® coated stainless steel wetted parts
• 4-20 mA output
• 0-500 to 0-30,000 psi
• Internal 80% shunt calibration

• Adjustable zero and span
• Accuracy better than ±1.0%
• DyMax® coated stainless steel wetted parts
• 0 - 10 Vdc outputs
• 0 - 500 to 0 - 10,000 psi
• Internal 80% shunt calibrations

• Economical and repeatable pressure meausurements
• Superior abrasion resistance
• Stability and repeatability
• Variety of pressure ranges
• Easy to calibrate

• Accuracy better than ±0.25%
• DyMax® coated stainless steel wetted parts
• Proven sensor design
• Excellent thermal stability and repeatability
• 0 - 500 to 0 -30,000 psi
• Internal 80% shunt calibration

• Accuracy better than ±0.5%
• DyMax® coated stainless steel wetted parts
• Proven sensor design
• 0 - 500 to 0 -30,000 psi
• Internal 80% shunt calibration

• Accuracy of better than ±0.25%
• Choice of flanged or threaded configurations
• 0 - 250 to 0 - 10,000 psi
• Withstands processes up to 700°F
• Internal 80% shunt calibration
• Replacement for traditional “button - seal” units

• Accuracy better than ±0.5%
• DyMax® coated stainless steel wetted parts
• Proven sensor design
• 0 - 500 to 0 -30,000 psi
• Internal 80% shunt calibration

• Output: 3.33 mV/V +/- 2.0%
• Input Voltage: 10 Vdc recommended, 12 Vdc maximum
• Combined Error: +/- 0.25% FSO, (Including Linearity, Repeatability & Hysteresis) +/- 0.5% FSO for 500, 750, 1,000 psi ranges
• Repeatability: +/- 0.1%FSO, +/- 0.2% FSO for 500, 750, 1,000 psi ranges
• Configuration: Four-arm bonded foil Wheatstone bridge strain gage
• Bridge Resistance: Input: 345 Ohms minimum, Output: 350 Ohms +/- 10%
• Over Pressure: 2 X FSO or 35,000 psi whichever is less
• Zero Balance: +/- 5% FSO
• Internal Shunt Calibration (R-Cal): 80% FSO +/- 0.5%
• Insulation Resistance: 1000 megohms @ 50 Vdc

• 6 mm sensing element
• Fits in space restricted areas
• Exposed, bendable capillary
• Ideal for injection molding nozzles
• Internal 80% shunt calibration
• Easy set - up
• 0 - 5,000 to 0 - 10,000 psi
• Choice of pressure ranges
• Good stability and repeatability
• Proven sensor design
• Flexible stem
• Easy to install, ideal for high local temperatures
• Classic, standard design
• Economically priced

• 6 mm sensing element
• Fits in space restricted areas, reduces mounting hole dead space
• Internal 80% shunt calibration
• Easy set - up
• 0 - 5,000 to 0 - 10,000 psi
• Choice of pressure ranges
• Good stability and repeatability
• Reliable pressure measurement
• Flexible stem • Easy to install and ideal for high local temperatures

• Accuracy better than ±1.0%
• Inconel diaphragm
• Superior temperature stability
• Patented sensing element
• 0 - 3,000 to 0 -30,000 psi
• Internal 80% shunt calibration

• Accuracy of better than ±1.0%
• Reliable pressure measurement
• Four user selectable pressure ranges in one model
• Maximizes inventory flexibility
• Externally selectable range via rotary switch
• Maximum versatility for changing process conditions
• 3.33 mV/V FSO for selected range
• Standard low level output
• Internal 80% shunt calibration
• Easy set-up
• All stainless steel wetted parts
• Corrosion resistant
• Proven sensor design
• Good stability and repeatability

• Accuracy of better than ±1.0% • Reliable pressure measurement
• Four user selectable pressure ranges in one model
• Maximizes inventory flexibility
• Externally selectable range via rotary switch
• Maximum versatility for changing process conditions
• 3.33 mV/V FSO for selected range
• Standard low level output
• Internal 80% shunt calibration
• Easy set-up
• All stainless steel wetted parts
• Corrosion resistant
• Proven sensor design
• Good stability and repeatability
• Type J thermocouple
• Simultaneously measure pressure/temperature in one location

The pressure transducers of the MDA series supply an output signal that is proportional to the process pressure via a closed, liquid-filled diaphragm seal system.