Showing 1–100 of 118 results

  • Digital indicator with interchangeable pressure sensors (plug-and-play)
  • Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
  • Type of pressure: positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
  • Software and complete service cases (incl. pumps) available
Datasheet
User Manual

  • Intrinsically safe indicator with interchangeable pressure sensors model CPT62I0 (plug-and-play)
  • Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]
  • Type of pressure: Positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate)
  • Data logger for recording measured values
Datasheet
User Manual

  • Digital indicator with interchangeable pressure sensors (plug-and-play)
  • Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
  • Type of pressure: positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
  • Software and complete service cases (incl. pumps) available


Datasheet
User Manual

  • Intrinsically safe indicator with interchangeable pressure sensors model CPT62I0 (plug-and-play)
  • Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]
  • Type of pressure: Positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate)
  • Data logger for recording measured values
Datasheet
User Manual

The model CPH7000 process calibrator is a precise, portable
calibrator for the calibration and checking of analogue
pressure measuring instruments, pressure transmitters and
process transmitters.
Datasheet
User Manual

  • Manual pressure generation of -0.85 … +25 bar [12.3 ... +360 psi]
  • Accuracy: 0.025 % FS (incl. calibration certificate)
  • Generation/measurement of 0 ... 24 mA and voltage supply DC 24 V
  • Data logger with high measuring rate and large memory
  • Intrinsically safe version

  • Digital indicator with interchangeable pressure sensors (plug-and-play)
  • Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
  • Type of pressure: positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
  • Software and complete service cases (incl. pumps) available
Datasheet
User Manual

Pneumatic service kit

Datasheet

  • Digital indicator with interchangeable pressure sensors (plug-and-play)
  • Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
  • Type of pressure: positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
  • Software and complete service cases (incl. pumps) available
Datasheet
User Manual

  • Digital indicator with interchangeable pressure sensors (plug-and-play)
  • Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
  • Type of pressure: positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
  • Software and complete service cases (incl. pumps) available
Datasheet
User Manual

  • Intrinsically safe indicator with interchangeable pressure sensors model CPT62I0 (plug-and-play)
  • Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]
  • Type of pressure: Positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate)
  • Data logger for recording measured values
Datasheet
User Manual

  • Manual pressure generation of -0.85 … +25 bar [12.3 ... +360 psi]
  • Accuracy: 0.025 % FS (incl. calibration certificate)
  • Generation/measurement of 0 ... 24 mA and voltage supply DC 24 V
  • Data logger with high measuring rate and large memory
  • Intrinsically safe version

  • Manual pressure generation of -0.85 … +25 bar [12.3 ... +360 psi]
  • Accuracy: 0.025 % FS (incl. calibration certificate)
  • Generation/measurement of 0 ... 24 mA and voltage supply DC 24 V
  • Data logger with high measuring rate and large memory
  • Intrinsically safe version

  • Case and wetted parts from stainless steel
  • Wide choice of special materials
  • High overload safety up to the 10-fold full scale value
  • Process connection thread or open flange
  • Scale ranges from 0 … 16 mbar
Datasheet
User Manual
User Manual
User Manual

  • High overload safety, optionally 40, 100 or 400 bar due to the metallic pressure element limit stop, without liquid-filled measuring cell
  • Wide choice of special materials
  • Compatible with switch contacts
  • Case and wetted parts from stainless steel
  • Scale ranges from 0 … 16 mbar
Datasheet
User Manual
User Manual
User Manual

  • No configuration necessary due to "plug-and-play"
  • Scale ranges from 0 … 16 mbar
  • Wide choice of special materials
  • For gaseous, liquid and aggressive media, also in aggressive environments, due to all stainless steel construction
  • Safety version S3 per EN 837
Datasheet
User Manual

  • Safety via mechanical pressure transmission
  • Case and wetted parts in hygienic design
  • Suitable for SIP and CIP, autoclavable version available
  • Easy zero point setting
  • High overpressure safety
Datasheet
User Manual

  • Integrated diaphragm element monitoring with status display (patent, property right: e.g. DE102016005568)
  • Two barriers for secure separation of the process from the atmosphere
  • Mechanical pressure transmission without transmission fluid
  • Completely autoclavable, suitable for CIP and SIP
Datasheet
User Manual

  • Compatible with switch contacts
  • Threaded or open flange process connection
  • Scale ranges from 0 … 16 mbar
Datasheet
User Manual

  • Compact, robust, easily cleanable design (patent, property right: DE102008042455)
  • Dry measuring cell, no transmission fluid
  • Flush, welded diaphragm
  • Suitable for SIP and CIP, autoclavable version available
  • Large selection of process connections
Datasheet
User Manual
User Manual

  • Dead space free media chamber
  • Excellent rinsing behaviour
  • Helium leak tested, leak rate ≤ 10-9mbar · l/s
  • Case and media chamber electropolished, surface roughness Ra ≤ 0.25 μm
  • All ultra high purity gas fittings available
Datasheet
User Manual

  • Zero point correction in front
  • Completely from stainless steel
  • With liquid-filled case for applications with high dynamic pressure loads and vibrations (model 633.50)
  • Low scale ranges from 0 ... 2.5 mbar to 0 ... 600 mbar or 0 ... 1 inH2O to 0 ... 240 inH2O
Datasheet
User Manual
User Manual

  • High overload safety up to 50 x full scale value
  • Scale ranges from 0 … 2.5 mbar
  • Measuring chamber protected against unauthorised intervention
  • Low measuring error and influence on function from medium pollution
Datasheet
User Manual
User Manual

  • Zero point setting in front
  • Special connection location on request
  • Low scale ranges from 0 ... 25 mbar
Datasheet
User Manual

  • Zero point correction in front
  • Case from stainless steel
  • Robust design and ingress protection IP54
  • Low scale ranges from 0 ... 6 mbar to 0 ... 600 mbar or 0 ... 2.4 inH2O to 0 ... 240 inH2O
Datasheet
User Manual

  • Safety version with solid baffle wall designed in compliance with the requirements and test conditions of ASME B 40.100
  • Low scale ranges from 0 ... 25 mbar to 0 ... 600 mbar
  • Nominal size 4 ½" (115 mm)
  • Robust, glass-fibre reinforced case from POCAN®
Datasheet
User Manual

  • Compact design and ingress protection IP53
  • Case from plastic
  • Special connection location on request
  • Low scale ranges from 0 ... 60 mbar
  • Maximum scale range 0 ... 1,000 mbar
Datasheet
User Manual

  • High overload safety up to 50 x full scale value
  • High reliability and long service life
  • Up to 4 switch contacts per instrument
  • Instruments with inductive contacts for use in hazardous areas
  • Instruments with switch contact for PLC applications
Datasheet
User Manual
User Manual

  • No configuration necessary due to "plug-and-play"
  • High overload safety up to 50 x full scale value
  • Easy-to-read analogue display with nominal sizes 100 and 160
  • Low measuring error and influence on function from medium pollution
  • Measuring chamber protected against unauthorised intervention
Datasheet
User Manual

  • Safety version with solid baffle wall designed in compliance with the requirements and test conditions of EN 837-1
  • Excellent load-cycle stability and shock resistance
  • Completely from stainless steel
  • Scale ranges from 0 … 0.6 to 0 … 1,600 bar
Datasheet
User Manual
User Manual
User Manual
User Manual

  • Excellent load-cycle stability and shock resistance
  • All stainless steel construction
  • German Lloyd approva
  • Scale ranges up to 0 … 1,600 bar
Datasheet
User Manual
User Manual
User Manual
User Manual

  • Overpressure range is indicated completely on scale
  • Safety version with solid baffle wall (Solidfront) designed in compliance with the requirements of EN 837-1 and ASME B40.100
  • With case filling (model 233.36) for applications with high dynamic pressure loads and vibrations
  • Measuring ranges from 0 … 0.6 bis 0 … 40 bar [0 ... 10 to 0 ...600 psi]
Datasheet
User Manual
User Manual

  • Overpressure range is indicated completely on scale
  • Safety version with solid baffle wall (Solidfront) designed in compliance with the requirements of EN 837-1 and ASME B40.100
  • With case filling (model 233.36) for applications with high dynamic pressure loads and vibrations
  • Measuring ranges from 0 … 0.6 bis 0 … 40 bar [0 ... 10 to 0 ...600 psi]
Datasheet
User Manual
User Manual

  • Overpressure range is indicated completely on scale
  • Safety version with solid baffle wall (Solidfront) designed in compliance with the requirements of EN 837-1 and ASME B40.100
  • With case filling (model 233.36) for applications with high dynamic pressure loads and vibrations
  • Measuring ranges from 0 … 0.6 bis 0 … 40 bar [0 ... 10 to 0 ...600 psi]
Datasheet
User Manual
User Manual

  • Excellent load-cycle stability and shock resistance
  • Safety version with solid baffle wall designed in compliance with the requirements and test conditions of ASME B 40.100
  • With case filling (model 233.34) for applications with high dynamic pressure loads and vibrations
  • Scale ranges from 0 … 10 to 0 … 30,000 psi [0 ... 0.6 to 0 ... 2,000 bar]
Datasheet
User Manual

  • POLARgauge® - special instrument design for extremely low ambient temperatures down to -70 °C [-94 °F]
  • Ingress protection IP66 and IP67
  • Completely from stainless steel
  • Measuring ranges from 0 ... 0.6 to 0 ... 1,000 bar [0 ... 10 to 0 ... 15,000 psi]
  • Case also available in safety level “S3” per EN 837-1
Datasheet
User Manual

  • Safety pressure gauge with solid baffle wall designed in compliance with the requirements and test conditions of the DIN 16001 high-pressure standard
  • Wetted parts from stainless steel 316L
  • Long service life with static pressure profiles
  • Scale ranges: 0 ... 2,000 bar, 0 ... 2,500 bar and 0 … 3,000 bar
Datasheet
User Manual

  • Safety pressure gauge with solid baffle wall designed in compliance with the requirements and test conditions of the DIN 16001 high-pressure standard
  • Wetted parts from stainless steel 316L
  • Long service life with static pressure profiles
  • Scale ranges: 0 ... 2,000 bar, 0 ... 2,500 bar and 0 … 3,000 bar
Datasheet
User Manual

  • Case and wetted parts from stainless steel
  • Version per EN 837-1 or ASME B40.100
  • Cost-effective and reliable
  • Scale ranges from 0 ... 1 to 0 … 1,000 bar [0 ... 15 to 0 ... 15,000 psi]
Datasheet
User Manual
User Manual

  • VCR® compatible face seal fittings
  • Helium leak tested
  • Electropolished case
  • Process connection surface finish Ra ≤ 0.25 μm
Datasheet

  • Fully welded mounting ring to prevent water ingress into the control panel (ingress protection IP66)
  • All stainless steel construction
  • Optionally as safety version "S3" per EN 837-1
Datasheet
User Manual
User Manual
User Manual

  • No configuration necessary due to “plug-and-play”
  • Measuring ranges of up to 0 ... 1,000 bar or 0 ... 15,000 psi
  • Easy-to-read analogue indication with nominal size 63
  • Safety version with solid baffle wall (Solidfront) designed in compliance with the requirements of EN 837-1 and ASME B40.100
  • Patents and property rights, e.g. US 8030990, DE 112007000980, CN 101438333
Datasheet
User Manual

  • No configuration necessary due to "plug-and-play"
  • Signal transmission per NAMUR
  • Measuring ranges 0 ... 0.6 bar to 0 ... 1,600 bar
  • Easy-to-read analogue display with nominal size 100 or 160
  • Safety version S3 per EN 837
Datasheet

  • Knife edge pointer for optimal accuracy of reading
  • Precise movement with wear parts of argentan
  • Scale ranges from 0 … 0.6 to 0 … 600 bar [0 ... 10 psi to 0 ... 10,000 psi]
Datasheet
User Manual
User Manual

  • Case and wetted parts in hygienic design
  • Suitable for SIP and CIP
  • Clamp connection easy to open for cleaning and seal replacement
  • Easy zero point setting
Datasheet
User Manual

  • Case and wetted parts in hygienic design
  • Suitable for SIP and CIP
  • Clamp connection easy to open for cleaning and seal replacement
  • Easy zero point setting
Datasheet
User Manual

  • Process connection with thread for direct threaded connection
  • Version with internal diaphragm
  • Diaphragm seal parts screwed together
  • Universal application
Datasheet
User Manual

  • Process connection with thread for direct threaded connection
  • Version with internal diaphragm
  • Diaphragm seal parts screwed together
  • Universal application
Datasheet
User Manual

  • Up to 4 switch contacts per instrument
  • Also available with case filling for high dynamic pressure loads or vibrations
  • Instruments with inductive contacts for use in hazardous areas
  • Instruments with contacts for PLC applications
  • Instruments optionally available in safety version S3 per EN 837
Datasheet
User Manual
User Manual

  • High reliability and long service life
  • Wide choice of special materials
  • Up to 4 switch contacts per instrument
  • Also available with liquid filling for high dynamic pressure loads or vibrations
  • Instruments with inductive contacts for use in hazardous areas
  • Instruments with contacts for PLC applications
Datasheet
User Manual

  • Differential pressure measuring ranges from 0 … 60 mbar
  • High working pressure (static pressure) and high overload safety, selectable up to 40, 100, 250 or 400 bar
  • Measuring cell liquid dampening against rapid pressure changes
  • Instruments with inductive contacts for use in hazardous areas
  • Instruments with switch contact for PLC applications
Datasheet

  • Process connection with thread for direct threaded connection
  • Version with internal diaphragm
  • Diaphragm seal parts screwed together
  • Universal application
Datasheet
User Manual

  • Process connection with thread for direct threaded connection
  • Version with internal diaphragm
  • Diaphragm seal parts screwed together
  • Universal application
Datasheet
User Manual

  • Quick cleaning, without residue
  • Milk thread fitting per DIN 11851
  • Suitable for cleaning out of place (COP)
Datasheet
User Manual

  • Quick cleaning, without residue
  • Milk thread fitting per DIN 11851
  • Suitable for cleaning out of place (COP)
 
Datasheet
User Manual

  • Quick cleaning, without residue
  • Milk thread fitting per DIN 11851
  • Suitable for cleaning out of place (COP)
Datasheet
User Manual

  • Quick cleaning, without residue
  • Milk thread fitting per DIN 11851
  • Suitable for cleaning out of place (COP)
Datasheet
User Manual

  • Quick cleaning, without residue
  • Process connection per Svensk Standard SS 1145
  • Suitable for cleaning out of place (COP)
  • Sterilisation-in-Place (SIP) up to max. 130 °C [266 °F]
Datasheet
User Manual

  • Quick cleaning, without residue
  • Process connection per Svensk Standard SS 1145
  • Suitable for cleaning out of place (COP)
  • Sterilisation-in-Place (SIP) up to max. 130 °C [266 °F]
Datasheet
User Manual

  • Quick cleaning, without residue
  • Process connection per Svensk Standard SS 1145
  • Suitable for cleaning out of place (COP)
  • Sterilisation-in-Place (SIP) up to max. 130 °C [266 °F]
Datasheet
User Manual

  • Quick cleaning, without residue
  • Threaded connection per SMS standard (SS 3352)
  • Suitable for cleaning out of place (COP)
  • Suitable for SIP and CIP
Datasheet
User Manual

  • Quick cleaning, without residue
  • Clamp connection easy to open for cleaning and seal replacement
  • Suitable for SIP and CIP
Datasheet
User Manual

  • Quick cleaning, without residue
  • Clamp connection easy to open for cleaning and seal replacement
  • Suitable for SIP and CIP
 
Datasheet
User Manual

  • Open flange with internal, all welded diaphragm with diaphragm bed
  • No sealings and clamping elements
  • Compact design
Datasheet
User Manual

  • Open flange with internal, all welded diaphragm with diaphragm bed
  • No sealings and clamping elements
  • Compact design
Datasheet
User Manual

  • Reliable and cost-effective
  • Design per EN 837-1 or ASME B40.100
  • Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"]
  • Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]
Datasheet

  • Vibration and shock resistance
  • Design per EN 837-1 or ASME B40.100
  • Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"]
  • Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]
Datasheet
User Manual

  • Version per ISO 5171 or for acetylene per ISO 7291
  • Safety features Model 111.11: With blow-out device in case back Model 111.31: With solid baffle wall (Solidfront)
  • Nominal size (NS) of the case Model 111.11: NS 40, 50 and 63 Model 111.31: NS 50
  • Scale ranges to 0 ... 400 bar or 0 ... 6,000 psi
Datasheet
User Manual
User Manual

  • Dead-space free, direct installation in pipes
  • Easy to open, self-draining in all mounting positions
  • Quick cleaning, without residue
  • Suitable for COP, SIP and CIP
  • Autoclavable version
Datasheet
User Manual

  • Dead-space free, direct installation in pipes
  • Easy to open, self-draining in all mounting positions
  • Quick cleaning, without residue
  • Suitable for COP, SIP and CIP
  • Autoclavable version
Datasheet
User Manual

  • Flange with a flush welded diaphragm
  • Robust, all welded design
  • Universal application
Datasheet
User Manual

  • Process connection with thread to provide for direct threaded connection
  • Version with internal diaphragm
  • Diaphragm seal parts all welded
  • Universal application
Datasheet
User Manual

  • Process connection with thread to provide for direct threaded connection
  • Version with internal diaphragm
  • Diaphragm seal parts all welded
  • Universal application
Datasheet
User Manual

  • Specifically for panel mounting
  • Reliable and cost-effective
  • Version per EN 837-1 or ASME B40.100
  • Scale ranges to 0 ... 400 bar or 0 ... 6,000 psi
Datasheet
User Manual

  • Double-diaphragm system to ensure the separation of the process and the pressure measuring instrument
  • Clamp connection easy to open for cleaning and seal replacement
  • Suitable for SIP and CIP
Datasheet
User Manual

  • Version per ISO 5171 or for acetylene per ISO 7291
  • Safety features Model 111.11: With blow-out device in case back Model 111.31: With solid baffle wall (Solidfront)
  • Nominal size (NS) of the case Model 111.11: NS 40, 50 and 63 Model 111.31: NS 50
  • Scale ranges to 0 ... 400 bar or 0 ... 6,000 psi
Datasheet
User Manual

  • Double-diaphragm system to ensure the separation of the process and the pressure measuring instrument
  • Process connection with thread to provide for direct threaded connection
  • All welded version with internal diaphragm
  • System from Monel
Datasheet
User Manual

  • Double-diaphragm system to ensure the separation of the process and the pressure measuring instrument
  • Process connection with thread to provide for direct threaded connection
  • All welded version with internal diaphragm
  • System from Monel
Datasheet
User Manual

  • Long service life, robust
  • Cost-effective and reliable
  • To combine with WIKA diaphragm seals
  • German Lloyd approval
  • Scale ranges up to 0 … 1,000 bar
Datasheet
User Manual
User Manual

  • Vibration- and shock-resistant
  • Especially robust design
  • NS 63 [2 ½"] and 100 [4"] with DNV GL approval
  • Scale ranges from 0 … 0.6 to 0 … 1,000 bar [0 ... 10 to 0 ... 15,000 psi]
Datasheet
User Manual
User Manual
User Manual

  • Very good vibration and shock resistance
  • Especially robust design
  • Type approval for the shipbuilding industry
  • Scale ranges to 0 ... 1,000 bar or 0 ... 15,000 psi
Datasheet
User Manual
User Manual
User Manual

  • Combined indication for pressure and temperature
  • Scale ranges to 0 … 10 bar [ 0 ... 150 psi] and 0 ... 120 °C [32 ... 248 °F]
  • Shut-off valve included in delivery
Datasheet

  • Process connection with flush, all welded diaphragm, with or without retainer flange
  • For highest dynamic pressures ≤ 2,500 bar
  • System fill fluids FDA and USP conform
  • Robust, all welded design
Datasheet
User Manual

  • Process connection with flush, all welded diaphragm, with or without retainer flange
  • For highest dynamic pressures ≤ 2,500 bar
  • System fill fluids FDA and USP conform
  • Robust, all welded design
Datasheet
User Manual

  • Intrinsically safe indicator with interchangeable pressure sensors model CPT62I0 (plug-and-play)
  • Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]
  • Type of pressure: Positive and negative overpressure, absolute pressure and differential pressure
  • Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate)
  • Data logger for recording measured values
Datasheet
User Manual

  • Differential pressure measuring ranges from -1 … +30 bar [-14.5 ... 435 psi] to 0 ... 40 bar [0 ... 580 psi]
  • High working pressure (static pressure) and high overload safety, selectable 40 bar [580 psi], 100 bar [1,450 psi], 250 bar [3,625 psi], 400 bar [5,800 psi] and 650 bar [9,425 psi]
  • The transmission fluid in the measuring chamber dampens the indicator in case of high changes of the rate of pressure
  • Model 73x.14: Stainless steel version
  • Model 76x.14: Version with special materials
Datasheet
User Manual
User Manual

  • Differential pressure measuring ranges from 0 ... 16 mbar to 0 ... 40 bar or 0 ...10 inH2O to 0 ... 600 psi
  • High operating pressure (static pressure) up to 40 bar [600 psi]
  • High overload safety up to 40 bar [600 psi]
  • Models 732.31 and 733.31: Case with safety level “S3” per EN 837
  • All-welded media chamber
Datasheet
User Manual
User Manual

  • Differential pressure measuring ranges from 0 … 16 mbar
  • High working pressure (static pressure) and high overload safety up to 40 bar
  • Also available with liquid-filled case for high dynamic pressure loads or vibrations
  • Instruments with inductive contacts for use in hazardous areas
  • Instruments with switch contact for PLC applications
Datasheet
User Manual
User Manual

  • Transmission of process values to the control room (e.g. 4 ... 20 mA)
  • Shatterproof window and robust aluminium or stainless steel measuring chamber for increased requirements
  • Optionally with approvals for hazardous areas
  • High ingress protection, IP65, for outdoor use and processes with high condensation
  • Low measuring range from 0 ... 160 mbar
Datasheet
User Manual

  • With one or two adjustable microswitches
  • Shatterproof window and robust aluminium or stainless steel measuring chamber for increased requirements
  • Optionally with approvals for hazardous areas
  • High ingress protection, IP65, for outdoor use and processes with high condensation
  • Low measuring range from 0 ... 250 mbar
Datasheet
User Manual

Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.